Black color ASTM GR13 HDPE Geomembrane 100% virgin material made For Saltworks
Description :
YIXING Shenzhou brand HDPE geomembranes are a kind of large molecule (macromolecule) polymer as the basic raw composed of waterproof and cut- offs(insulation & separation) geosynthetic material
Type: HDPE geomembrane, composite geomembranehigh strength. low permeability. chemical corrosion resistance. ultraviolet & sun exposure resistance. oxidation resistance, weather resistance, antimicrobial, erosion resistance.
HDPE Geomembrane Feature
1. Without chemical additives and without heat treatment, it is a friendly building material
2. It has good mechanical properties, good water permeability, anti-corrosion and anti-aging
3. It has strong anti-burial and corrosion resistance, fluffy structure, and good drainage performance
4. It has a good friction coefficient and tensile strength and has geo-reinforcement properties
5. It has the functions of isolation, anti-filtration, drainage, protection, stabilization, and reinforcement
6. It can adapt to an uneven base layer, can resist the damage of construction external force, and has a small creep
7. Good continuity, lightweight, and convenient construction
8. It is a water-permeable material, so it has a good anti-filtration isolation function and strong puncture resistance, so it has a good protective performance
9. HDPE Geomembrane Specifications
Yixing Shenzhou HDPE Geomembrane for Saltworks
HDPE Geomembrane TDS
| No. | Properties | Test Method | Test Value |
| 1 | Thickness(mm) | ASTM D5199 | 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 |
| 2 | Density (g/cm2) | ASTM D1505 | 0.939 |
| 3 | Tensile Propeties | | |
| Yield Strength(N/mm) | ASTM D6693 | 7 | 11 | 15 | 18 | 22 | 29 | 37 | 44 |
| Break Strength(N/mm) | 13 | 20 | 27 | 33 | 40 | 53 | 67 | 80 |
| Yield Elongation % | Type IV | 12 |
| Break Elongation % | 700 |
| 4 | Tear Resistance/N | ASTM D1004 | 62 | 93 | 125 | 156 | 187 | 249 | 311 | 374 |
| 5 | Puncture Resistance/N | ASTM D4833 | 160 | 240 | 320 | 400 | 480 | 640 | 800 | 960 |
| 6 | Stress Crack resistance/hr | ASTM D5397 (App.) | 300 |
| 7 | Carbon Black | |
| Carbon Black Content % | ASTM D1603 | 2.0-3.0 |
| Carbon Black Dispersion | ASTM D5596 | Carbon black dispersion(only near spherical agglomerates)for 10 different views 9 in categories 1 or 2 and 1 in category 3 |
| 8 | Oxidative Induction Time(OIT) | |
| Standard OIT/min | ASTM D3895 | 100 |
| High Pressure OIT/min | ASTM D5885 | 400 |
| 9 | Oven Aging at 85°C | |
| Standard OIT-% retained after 90 days | ASTM D3895 | 55 |
| High pressure OIT-% retained after 90 days | ASTM D5885 | 80 |
| 10 | UV Resistance | |
| Standard OIT retained after 1600 hrs | ASTM D3895 | 50 |
| High pressure OIT retained after 1600 hrs | ASTM D5885 | 50 |
| 11 | Low tempreture impact brittle property at -70°C | _ | Pass |
| 12 | Permeability g·cm/(cm2)·Pa | _ | ≤1.0×10-13 |
| 13 | Dimensional Stability/% | _ | ±2 |
HDPE GEOMEMBRANE INSTALLATION
The geomembrane can not be dragged and pull to avoid hu ing by sharp objects during carrying.
1. It should be extended from the bottom toward the top, can not tightly pull, it should keep 1.5% margins for local stretching. To view actual conditions, the laying sequence from top to bottom is adopted for the slope.
2. Two adjacent geomembrane's joints in the machine direction should not be on a levelline, should be staggered over 1 m. The overlap should be over 20cm.
3. The joints in the machine direction should be over 1.5m apa from the foot of dam, turn, should be located at the plane.
4. Laying order: first slope then the bottom of site
5. The direction of extened geomembrane should be basically paraliel with the line of maximum slope when laying the slope.
Welcome to Contact With Yixing Shenzhou !!!
Product Tags:
|
|
Black color ASTM GR13 HDPE Geomembrane 100% virgin material made For Saltworks Images
|
